Battery adapter Womax S20V to INGCO tools P20s
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery adapter Womax S20V to INGCO tools P20s
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 514
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm
A dry wall metal supports are good alternative for metal sheet , for contacts.
A wood screw betwine 20 - 30 mm depends on tool handle size on the other side , for securing to tool.
Solder metal contact outside of plastic adapter and then insert in print . A 60 Watts or higher soldering iron is a good idea.
Some tools need a third pin that detect battery temperature , a work around is to use 10 000 ohms ( 10K ) ¼ Watts , connect betwine signal wire third one ( middle connection ) and battery minus usually, some use plus connection , so try with which one works . it is a 10 000 ohms resistor very very little chances of shorting something.
Once inserted a 3d printer pencil or a glue gun are good for securing connections.