1 / 5
SKADIS adapter to LERBERG Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SKADIS adapter to LERBERG Shelf on the back, reusing the already existing holes
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I've found a way to adapt the SKADIS pegboard at the LERBERG shelf, on its back. It can be accessed from inside, but I'm acessing it from the back, where I have the full board available.
You'll need 2 screw adapters and 2 fixing clips. You'll need M4 or M5 screws, 4 in total, 2 at least 16mm length, the other 2 need to be more than 30mm. I'm using 2 M5x16 and 2 M5x30.
Printed in PETG due to the fact it is more flexible, but it can be printed in any material. Hope it is useful!