1 / 8
Flip knife with frame lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fun little knife to fidget with.https://youtu.be/hxRsqbLM88U
- Rating
- 4.667 / 5
- Likes
- 52
- Downloads
- 411
- Makes
- 1
- Views
- 1,742
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A fun little knife to fidget with. https://youtu.be/hxRsqbLM88U
Print Settings
Rafts:
No
Supports:
Yes
Infill:
20%
Notes:
- Supports required to prevent frame locker from fusing to rest of frame. Lefties need to mirror all parts (except pin obvs). The frame work with PLA, however ABS is better as it will hold spring tension better. The blade and pin work fine in PLA. If you print in ABS, you may need to scale down the pin slightly and glue it in place as it may crack the frame when you press it in.
- Run a knife or sharp spatula around the frame locker to free it.
- Run a thin tool e.g. screwdriver through the frame to remove support material.
- Glue both sides of blade together (aligning the halves after assembly is easier).
- If you printed in PLA, store the knife open to prevent the frame from losing its tension.
Post-Printing
Category: Hand Tools