1 / 2
Horns on hairband v2 — image 1
1 / 2

Horns on hairband v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Devil horns on a hairband

Rating
4.8 / 5
Likes
286
Downloads
935
Makes
9
Views
3,182
Reviews
10

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The horns have a tight fit on the hairband so that you can adjust the position as you like, no glue needed.

Horns printed in PLA (matt PLA was used for the pictures)

  • both 0.1 or 0.2 mm layer height should work.
  • 15% infill is sufficient for having good stability at the base 
    (you can add a modifier with 0% infill at 60mm height)
  • for best quality print horn separately  

Hairband PLA or PETG

  • both 0.1 or 0.2 mm layer height should work.
  • no infill needed
  • organic support for the connectors

Hairband adjustments:

  • too narrow … try to gently bend it in your hands
  • too long … cut the ends with a cutter knife or side cutter and sand the sharp corners

Tags