CLC Teardrop Camper Fillet Tools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fillet tools for use when building a Chesapeake Lightcraft Teardrop Camper.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I built a CLC Teardrop Camper and realized that I didn't have fillet tools necessary for shaping the corner fillets throughout the project. I thought it might be a neat idea to try and recreate them so I could print new ones as often as I needed them and didn't need to worry about cutting out pieces from plywood, etc. It looks like I wasn't the only one who thought this was a neat idea so I'm uploading my design so it can be shared.
I used the radii measurements from the CLC manual and approximated the orientation from the fillet tools that CLC references. I printed these in PLA and used a 30% infill and they seem pretty sturdy. Another option is to print them in something like nylon so the epoxy doesn't stick to the tools, but I don't think it's necessary since the base tools are made from plywood which definitely sticks to epoxy.