External Optical Drive Case (Stackable) | 5,25"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
External drive case for 5,25" half height form factor. Also has a stackable version
- Rating
- 5 / 5
- Likes
- 117
- Downloads
- 480
- Makes
- 2
- Views
- 2,410
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Info
An external optical drive bay because no modern case has an internal one :). Usefull if you want a cheap BluRay drive that you can connect to different devices.
You'll need a sata to usb adapter to be able to connect it with a usb. The one I use is the Vantec CB-ST00U3. If you use a different adapter you might need to change the size of the hole at the back. The spacing is quite generous so it'll likely not be a problem.
Also has a stackable version with 2.5mm clearance between units for the screw heads securing the optical drive to the case.
Printing
Printable with any filament, I used PLA.
Print without support in the given orientation.
Size
Width: 153mm
Height: 53mm
Depth: 208mm
If you have a slightly longer optical drive there's also a version with extra clearance for longer drives.
Normal version max drive length: 171mm
Extra clearance max drive length: 181mm
Hardware
- 4x M3 x 8mm screw
- Vantec CB-ST00U3 (or other adapter)