Oral-B stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.21 – €10.04 net (excluding VAT)
For file: Oral-B stand.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.12 excluding VAT (range midpoint).
- Weight reported by the author
- 98 g
- Print time reported by the author
- 9.9 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stand for Oral-B Electric tootbrushes
- Rating
- 4.857 / 5
- Likes
- 200
- Downloads
- 1,234
- Makes
- 8
- Views
- 8,597
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for Oral-B Electric tootbrushes. A remix of the work by Coolshrimp.
The maker included a link to the design in TinkerCAD, but the page could not be found. I changed the design to have 2 stubs for handsets and one place for the charger. I enlarged the space for toothpaste and I made holes to drain water from that compartiment. I also included a small tray for small stuff like toothpicks and such.
It's a work in progress as I may apply changes as we use this.
Printing:
Not a very hard print, though since I added the little tray, you'll need supports for that. Set supports only on buildplate, otherwise it's probably going to fill up the drain holes. Perimeters/outer shells may be set to 4.
Note:
I noticed a few imperfections in printing that I didn't see in TinkerCAD. The original design featured two holes for mounting it on the wall, which I removed by 'plugging' them with a small cilinder. But I didn't position them very well and now you still see the contoures of the holes. That's the problem when you don't have the design files and edit STL using copy/paste of shapes and holes to make what you want.