Book Riser for Besta and Billy (compatible with 60cm and 40cm wide shelf)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.71 – €6.97 net (excluding VAT)
For file: Book left_right_0.4n_0.2mm_PLA_COREONE_4h41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.34 excluding VAT (range midpoint).
- Weight reported by the author
- 114 g
- Print time reported by the author
- 4.68 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Book Riser to better utilize the space in Ikea shelfs. Originally designed for 60cm Besta or 40cm Billy shelves.
- Rating
- 4 / 5
- Likes
- 37
- Downloads
- 149
- Makes
- 1
- Views
- 914
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Book riser with hexagonal pattern. Originally designed for 60cm Besta or 40cm Billy shelves.
Printing instructions:
- 2 Perimeters
- 10% Infill
- 0.20mm layer hight or higher
Even with the weight of a lot of books 10%infill is plenty to provide a stable riser.