1 / 7
Bio Waste Bin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small (20x20x22) table bin for biodegradable waste.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Bin for bio waste with magnetic lid and room for carbon filter (2mm thick).
Printing
these parts when sliced must be paused for magnet insertion:
- filterCover (4 magnets of size 5x2)
- lid (this print task must be stoped once only to add 2 magnets of size 6x2 to the corners. Magnets for the filters (4 magnets of size 5x2) are visible and can be added after printing finishes.
- bin (2 magnets of size 6x2)
the holes are ready and are ~0.4mm bigger than magnets. Round magnets of size 6x2mm should be used. 5x2mm are also ok.
I prepared also 3mf files with pauses at the layers when magnets should be inserted.
No supports are needed and spon should be printed with brim.
For the