1 / 3
Adoration of the Magi greeting card — image 1
1 / 3

Adoration of the Magi greeting card

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is the second of 3 printed greeting cards aiming to develop a method of colour printing with the use of cyan,…

Rating
0 / 5
Likes
3
Downloads
11
Makes
0
Views
599
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is the second of 3 printed greeting cards aiming to develop a method of colour printing with the use of cyan, magenta, yellow and black as primary colours and a key. The description of "The symbols of Kwanzaa" explains further the process of converting a 2d image into 3d printable models. Currently the restraints are colour balance, resolution and printing speed. The
Print instructions below offer some modest improvements in speed.

Print instructions

I should have stated in "the symbols of Kwanzaa" Print instrucions that a sheet bed and glue are recommended.

There are 4 changes to the print instructions to improve quality and speed.

For slicing the 4 colour files:
Print settings - Infill - Solid infill every: 0 layers

       - Advanced - Extrusion width - Infill 0.4

Tune Speed to 40%

For the 2 backing files Print settings - Speed - Modifiers - First layer speed 35