Trail Camera Pivoting Mounting Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Articulating trail camera mount for deer/bear hunting.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 86
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This lets you mount your trail cameras angled down. I like to hang my cameras several feet up on the tree so deer and thief's cant see them. I have several of these brackets which have been holding cameras all year. I like printing them out of ABS but PETG, ASA, or other weather resistant filaments will work too.
Printing: 0.2mm layer height, 5 vertical and horizontal shells, 20-30% infill. Organic supports everywhere. Print Tree Side, Pivot knob, and Pivot Side in orientation shown in pictures.
Anti-rotation knob: 2 quantity needed for each assembly. Same print settings as above but with no supports. They have a captured nut which is added during a pause in printing. Add a pause to insert a ¼"x20 plain hex nut at 7.80mm height. These knobs tighten against the camera to lock it from rotating on the bolt.
Hardware needed: Per assembly
¼"x20 X 2"LG Hex head bolt Qty 2
¼"x20 plain hex nut Qty 2
¼"x20 nylon locking hex nut Qty 1
Enjoy! If you print these please share pictures of them being used.