ClearMindCasting Jewellery Resin Calibration Object
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, 1mm stone settings to test fit in reality.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 110
- Makes
- 0
- Views
- 351
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Yet another resin calibration object, hopefully we don't need these some day.
-Designed specifically for jewellers to slot stones of 6mm, 5mm, 4mm, 3mm, 2mm, 1.5mm, and 1mm and test exactly how accurate a resin print will be in reality.
-Upright sample rings give an indication of support density requirements to prevent slumping and help understand how many supports are needed, usually indicating how strong the resin is, something that most casting resins struggle with.
-Center hole should be exactly 10mm and will help indicate elephants foot compensation to ideally enable you to print models directly on the bed as needed without having to deal with the over exposure growth from Burn-In/Bottom layers.
-Embossed and Debossed in cursive to test fine detail accuracy and possible XY pixel stair stepping on curves.
Photo generated using Shapr3D Generative Rendering.