3/4 pex-a arch bases, 4 degree tilt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for pex-a they have a 4 degree tilt and use standard 7" nail spikes
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Public Domain
these have a 4 degree tilt so they give a nice arch look, if using a 8 ft tube they would sit 3ft high spaced 5 ft apart, the middle tube was made for ½ emt, one 10ft emt works cut in half. i didn't include a set screw since its totally subjective to your nozzle size, they should be friction fit anyways if you planning on using them, not needed but nice for alignment. these are very heavy duty and wider then most to keep them from blowing over in wind and use a lot of filament a simple 25% infill is more then enough. you can use the cheap 7" nail spikes found a Menard's or home depot. tubes were made to fit pex-a pteg work great