1 / 1
Parkside PWSA 12 Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remixed version of the original Skadis holder (by Skadis / Parksde PWSA-12-B1 angle G) adapted for wall mount
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a remixed version of the original Skadis holder (by Skadis / Parksde PWSA-12-B1 angle G) adapted for wall mounting.
I removed the Skadis pegboard hooks and replaced them with three 3 mm mounting holes so the holder can be screwed directly to a wall, tool board, or cabinet.
🔧 Features
Fits the original Skadis tool geometry
3 × 3 mm holes for direct wall mounting
Simple, minimalist design
No supports needed for printing
🖨 Print Settings Suggestion
Material: PLA / PETG
Layer height: 0.2 mm
Infill: ~15–20 %