Luer Lock M/F Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Double-ended Male/Female Luer Lock Cap
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 2,269
- Makes
- 8
- Views
- 6,929
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Double-ended Male/Female Luer Lock Cap. In the image the red parts are printed in FDM while the blue ones are the original injection-molded part.
Fully 3D-printable in FDM in both orientations, no supports required.
Optimized for a 0.4 nozzle, 0.15 layers or less.
WARNING: the seal likely won't be air-tight due to imperfections in the printing process. Liquid can also penetrate between micro-fissures between the layers. You must consider if these limitations can affect your experiment.
Cooling and material is extremely important when printing this part accurately: PETG or PP recommended. Always print multiple copies to ensure the material doesn't overheat while printing.
Using a SLS/SLA process should result in an air-tight part.
A big shootout to this page which provided a good basis for the measurements.