Bag Hanger for Ikea JOSTEIN
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little extension for your shelving unit
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Story: Our bags were (f)lying around in the kitchen, taking up a lot of space. Therefore, I have designed this little hanger to hang our grocery bags and can easily be attached to the shelving unit. The design has some play, so after attaching it you can still move it up and down. You need the following items:
- 4xM3 Screws
- 4xM3 Nuts or 4xM3 Heated Inserts
I recommend using heated inserts. If you have not used heated inserts before, you should get a TS101 and a soldering tip adapter for heated inserts.
I have used PLA, but you can also use PETG, ABS and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| eSUN PLA+ | Amazon |
| Anycubic PLA | Amazon |
PETG | |
| Eryone PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| Elegoo Rapid PETG | Amazon |
ABS | |
| Amazon Basics ABS | Amazon |
| Creality ABS | Amazon |
| OVERTURE ABS | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.