Shorter Voron/Monolith pulley dehubbing tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shorter pulley dehubbing tool that uses M5x40 SHCS instead of M5x50 SHCS.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 167
- Makes
- 4
- Views
- 420
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Stock Voron/Monolith BOM does not include M5x50 SHCS. The original model was a shy too long to use M5x40 SHCS, which should already be on hand.
V2-beta changes:
Choice to use an M5 T-nut instead of an M5 hex nut to increase contact area.
Changed the design such that the nut housing is a single piece to prevent stripping the plastic.
Thickened the material under the nut to hopefully prevent cracking.
Support for 6, 9, and 12mm pulleys up to 16mm diameter.
Due to length limitations with M5x40 bolts, each pulley size has a different internal spacer. Print accordingly.
Note:
V2 changes are still mostly untested. Please provide feedback!
I highly recommend getting the clamping sleeve as it can be more difficult to hold the smaller dehubbing tool.