Small track cog concept for 12 and 9 tooth
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The idea is to use a regular iso disk brake mount for a fixie. I like to use a front hub. I 3d printed to check fit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
This is an idea I had in my head for a while. I was inspired by the old PFIX hub design. This is a basically a simplified version of that idea where you use a disk brake hub to mount a fixed cog. A 3d printed version will obviously not work on a real bike and you would need to have it machined out of steel to actually work. In practice you would probably start with a 100mm wide front hub, replace the 10mm axle to something around 180mm long and respace to 120. you would choose the spacers to ensure proper chainline.