1 / 2
Voron 2.4 Skirt Mesh Blanks for Glue-On Mesh (300mm) — image 1
1 / 2

Voron 2.4 Skirt Mesh Blanks for Glue-On Mesh (300mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple blanks for printing skirt mesh using honeycomb infill with no top or bottom layers.

Rating
0 / 5
Likes
5
Downloads
7
Makes
0
Views
165
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

These are simple blanks for printing Voron 2.4 skirt mesh using honeycomb infill with no top or bottom layers. 15% infill worked well for me but you can play around. Once you have printed the mesh, simply glue it to the back of the skirts using a sparing amount of CA glue. 

This has been done many times but I could not find ready to print files posted anywhere.

I only made files for the 300mm Voron 2.4, but simply trimming them would likely work just fine for the 250mm

The current design is only 0.6mm thick which worked fine for me but if you would like thicker you can adjust the Z scaling in your slicer.

NOTE: I glued the mesh onto the wrong side of the fan mounts since on all other parts it is the bed side you want to glue to, don't be like me or you will end up with mesh on the outside of your fan mounts

Tags