1 / 2
Blokees/Amiibo/Figure Stackable Display Shelf V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fresh of my stackable shelves for small figures like Blokees, Amiibos, etc.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 90
- Makes
- 0
- Views
- 587
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
Refresh of my stackable shelf design for figures cause now I have a pile of Blokees instead of Amiibos!
Base plate is now a bit thicker to better handle the weight, rods are now looser with a 0.3 tolerance between the pegs and the hole.
Simply mix a match the rods and plates that you need.
Print And Assembly Advice
- When printing the rods, refer to the picture and make sure you print with the NARROW part of the connector peg on the print bed.
- When assembly the top plates do not apply force on the whole plate but rather focus on the connection point instead. Please watch the video as a guide so you don't accidentally crush the assembly.