Lilygo Pager Thermal Cam Upgrade for Blackout Comms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your Lilygo Pager into a Thermal Camera with this enclosure plus an MLX90640 & some soldering (see PDF guide)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Upgrade Your Lilygo Pager with a Thermal Camera!
The Blackout Comms firmware (v3.1.3 or higher) automatically recognizes and uses the Adafruit MLX90640 thermal cam, if its attached properly!

This allows you to use the pager as an off-grid texting/tracking device, but also as a thermal camera!
If properly set up, you'll know the camera is recognized because you'll see the blue camera icon show up as it does in this pager screenshot.
If you haven't already, you'll need to install the Blackout Comms Pager firmware onto your Lilygo Pager. It's free if you're just using this thermal cam, and pretty easy to install.

Note: Be Careful!
If you connect the camera improperly (reversing polarity, shorting, etc) you may destroy the pager or camera! Don't do this unless you're experienced working with electronics. I'm not responsible if you mess up your pager!
Simplified instructions (see PDF for details):
- 3D print the enclosure
- Insert the MLX thermal cam into the enclosure
- Create a pin header/adapter for the Pager's expansion port (on top of the pager)
- Plug together the thermal cam & pager
- Attach the enclosure to the pager