1 / 5
flex-hex fabric - print-in-place and snap-fit double-sided — image 1
1 / 5

flex-hex fabric - print-in-place and snap-fit double-sided

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My attempt to make 3d printed fabric

Rating
0 / 5
Likes
145
Downloads
476
Makes
0
Views
2,214
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Just another 3d printed “fabric” this one has a small unique feature. Pieces can be printed connected together (print-in-place) but also can be connected together after printing (snap-fit) - so you can mix colors, make the fabric extremally long and fix broken pieces. Another nice feature is that the fabric shows clean hexagons on both sides of the print. It's not very flexible - i think that the bending radius is about 10cm. This is just a proof of concept - It was fun to project and maybe I will improve this design in the future.

The design works as snap-fit but after several connect-disconnect rounds the joint is pretty loose and can disconnect on its own. So maybe the best way is to use it as print-in-place with a possibility to connect several printed parts together

How to print:

two perimeters should be enough. no need to add any infill - just add one more layer on top. I've printed mine with PETG-CF. PLA should work, but I prefer PETG, because it's less brittle and layer bonds are stronger.

This is how the single piece looks like:

Tags