Hanging Pencil & Crayon Box, Semidivided
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.17 – €0.21 net (excluding VAT)
For file: pedestal_PLA_0.9e_0.36z_MINI-JJR.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.19 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 6.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An asymmetric variant of my other semidivided pencil box, with room on one side for a box of crayons.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- BSD License
This box hangs on the edge of a basket, holding crayons, pencils, and whatnot, alond with a laminated card the full width of the box.
Print without infill, and with no solid bottom layers. Give it just enough solid top layers that, where the hook attaches to the rest of the box, they start at the bottom layer. Add a brim to improve bed adhesion.
Use this box however it suits you. But if you use the left side for a crayon box as I do, then I suggest that you also print the optional pedestal which raises the crayon box by 12mm.
The crayon box pictured is of 16 standard .30-caliber crayons.