1 / 5
Makerflo Whiskey Rocks Glass Xtool Jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Xtool jig for the Makerflo 8oz Whiskey Rocks glass
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 98
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a jig for the Makerflo 8oz Whiskey Rocks Glass. I made this for my Xtool P2s to allow the glass to sit parallel to the honeycomb panel so I could engrave “flat surface” vs “curved surface”.
This is an easy print with no supports needed.
There are 2 pieces.
- The jig has a minimal 9mm lift
- The baseplate, which is designed to be used as a support to keep the jig in place, makes it easy to rotate or switch the glass without losing the laser position.
Notice that the baseplate has 4 hold-downs in the photo that I am using. There are cutouts, and the spacing is designed to use these simple Honeycomb Hold-down Pins in the xTool Honeycomb 2.0 panel.