1 / 6
Self-Securing Hook / Holder with ball lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Self-Securing Hook / Holder with ball lock
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This self-securing hook consists of 3 parts:
- Base (120x50mm): Just mount it anywhere you like it has 5 mounting holes to meet almost every requirement. You can also put a strong magnet into the case to use this hoof WITHOUT any screws on metall surfaces.
- Marble or metal ball: Use a standard 16mm marble or (better) a heavier metal ball.
- Cap: Just stick it into the base and secure it with a M5 countersunk screw from the top. This prevents the cap from falling of and hold it tight to clamp parts with the sliding ball/marble.
After that you can use this hook for holding your notes, hand towels or whatever.
To get the parts OFF the hook just slide them UP a little bit (to free the ball) and than out TO THE SIDE of the hook. Easy!
Enjoy & have fun!
Material: PLA
Infill: 15%
Layerheight: 0.2mm