Blinkenlights computermachine warning signage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sicherheit geht vor!
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 74
- Makes
- 1
- Views
- 1,243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Ein Satz Warnhinweise, um Unbefugte auf die Risiken unsachgemäßer Bedienung hinzuweisen, und Leitlinien für das angepasste Verhalten zu geben. Traditionell benutzt für Rechenmaschinen, hat sich aber auch bei anderen elektrischen Gerätschaften bewährt.
Gestaltet und modernisiert in Anlehnung an ISO 7010 nach dem Stil des Vereinigten Königreichs.
https://de.wikipedia.org/wiki/Blinkenlights_(Jargon)
https://en.wikipedia.org/wiki/Blinkenlights
Features
- manual multicolour
- can be backlit
- two holes for 3mm countersunk screws
- model size: 236.46mm × 169.31mm × 0.95mm
Production
- multimaterial
- different colours per (1st) layer
- manual filament change, no MMU required
- already set up in the 3mf file
- G-code generation takes a while, but will not schnappen der Springenwerk
- no assembly required
Colour change
You'll only need to attend the printer for the first part of the first layer. White is the last colour to be changed to, and will print the remainder of the entire print time.
When you use the atteched 3mf settings, the first layer will be built up as follows:
Layer info, Layer number: 1
Layer height (mm): 0.2
GCODE commands: 94845
Filament (Tool 0): 149.30mm
Filament (Tool 1): 580.10mm
Filament (Tool 2): 441.83mm
Filament (Tool 3): 288.51mm
Filament (Tool 4): 620.84mm
Estimated print time: 01:09:21
Colours
are best chosen to ISO 3864 https://en.wikipedia.org/wiki/ISO_3864
yellow, red, blue, black and white are required; white not only serves a a base, but also to helps the colours on top shine better, as filaments are usually not densely pigmented.
Material
I have mixed ASA, ABS and PETG, so I could chose the best matching colours.
Nozzle
The smaller, the better - details may get lost, especially in the symbols. Pictures show 0.25mm-prints.
Changelog
rev00; 2022-03-06
initial release
rev01; 2022-03-07
increased 1st layer extrusion width from 0.35 to 0.38 to minimise small gaps in colouring; changed the design of the Schnappen symbol to be wide enough for one line
 |  |
| rev00 | rev01 |