Modular Picture Frame – Assorted Sizes
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.20 – €0.25 net (excluding VAT)
For file: frame-pegs-sextet_PLA_0.9e_0.36z_MINI-JJR.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A pretty frame to display many sizes of photos and artistic whatnots.
- Rating
- 0 / 5
- Likes
- 148
- Downloads
- 389
- Makes
- 0
- Views
- 3,306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- BSD License
A good-looking modular frame. All parts are printable on a 180x180mm bed. If you print just the corner pieces and four joint pegs, you'll get a nice frame for a 4" square picture. To increase the length of any side, add side extensions of 1", 2", 4", 8", or any combination thereof. Plus an extra peg for each. Thus all Imperial photo sizes from 4"x6" to 16"x20" and beyond are easily created. To fasten each piece to the next, print a square peg and press it in. To retain a picture up to 2mm thick, print four corner backs and glue them on.
Example Parts Lists for Some Common Art Sizes
- 4"x6" needs 4 corners and backs, a pair of 2" side extensions, and six pegs. Estimated print time and total mass of filament are based on this size.
- 5"x7" needs 4 corners and backs, a pair of 2" side extensions, two pairs of 1" side extensions, and ten pegs.
- 8"x10" needs 4 corners and backs, a pair of 2" side extensions, two pairs of 4" side extensions, and ten pegs.
- 11"x14" needs 4 corners and backs, a pair of 8" side extensions, a pair of 4" side extensions, two pairs of 2" side extensions, a pair of 1" side extensions, and fourteen pegs.
- 16"x20" needs 4 corners and backs, three pairs of 8" side extensions, a pair of 4" side extensions, and twelve pegs.
Notes
- A millimeter or two at each edge of the picture will be hidden by the frame.
- The corner backs that I provide are meant for use without glass. I prefer to keep my pictures free of glare.
- One good way to mount this frame on a wall is to fasten Command™ picture-hanging strips to the corner backs.
Credits
The style of this frame is based on a simplified model of Ryan Rose's 5"x7" frame.