Xmas Tree Twist
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here we have a Christmas tree with a twist! Complete with a separate .stl for a snowflake topper!
- Rating
- 4.813 / 5
- Likes
- 268
- Downloads
- 1,263
- Makes
- 19
- Views
- 4,650
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here we have a Christmas tree with a twist! Complete with a separate .stl for a snowflake topper! Make one, make many, have a happy holiday!
Print instructions
The tree will require a 0.2mm or finer model detail to successfully print. At 0.2mm, 3 perimeters will be required to make it work, but infill can be reduced to 10%; no support or raft is necessary. This model can be scaled as well, as I printed both at 50% without issues. The top has a 6mm x 6mm square for the snowflake to slot into.
The snowflake is straight forward, and was printed at 0.3mm layers with 10% infill without supports or rafts.
The print time is around 8 hours for the tree at 0.2mm. If you have issues with the tips curling during the print on the longer sections, try slowing the print speed and ensure adequate cooling for the printer.