1 / 4
Thing - The Addams Family
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This beautifully scrolled box is not only home to Thing, but also has a compartment to hide candies.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This beautifully scrolled box hides a surprise. It's "Thing" from the Addams Family, the disembodied hand!
The lid opens only 40 degrees because that's how Thing prefers it. Inside, are areas for candies with a circular isolation area to prevent jamming underneath Thing.
This unit has been scaled for 180mm 3d printer beds but can easily be scaled up for a larger more intimidating Thing.
Bottom Slicer Settings
- Print orientation - Sitting on box bottom
- Layer height - 0.28
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 10%
- Infill pattern - Cubic Subdivision
- Support - Required
- Support Structure - Normal
- Build plate adhesion - None
Lid Slicer Settings
- Print orientation - Sitting in lid top
- Layer height - 0.28
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 20%
- Infill pattern - Cubic Subdivision
- Support - Required
- Support Structure - Tree. Tree supports provide least artifacting and easier removal.
- Build plate adhesion - None
Hinge Pin Slicer Settings
- Print orientation - Lengthwise for strength
- Layer height - 0.20
- Wall line count - 4
- Top layers - 4
- Bottom layers - 4
- Infill density - 20%
- Infill pattern -Cubic Subdivision
- Support - None
- Build plate adhesion - Brim