Cereal Box Filament Spool Roller (6204-2rs bearing)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on Cereal Box Filament Spool Roller of dkrnet, I designed a roller base for 6204 bearing.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 28
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I had some 6204-2RS bearings that were disqualified for industrial use. Inspired by dkrnet’s Cereal Box Filament Spool Roller (using 608 bearings), I designed a roller base specifically for the 6204 bearings.
I encountered some issues keeping the roller base in place, so I added a central support that attaches to the small molded spot in the center of the cereal box. I used Gorilla contact adhesive for this.
The silica box fits perfectly over both the center and rear sections of the base. You can use one or two boxes, depending on your preference. The one in the center helps slightly to keep the spool aligned. The hygrometer holder fits neatly onto the front end of the base.
Printed with PETG at 0.2 mm layer height, using 2 wall loops, 15% infill. Very basic.
So far, everything works smoothly without any issues. Thanks for your feedback!