DIN rail mounts for printer controller boards
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN rail mounts for combinations of the Duet 2, Duex2, Duex5, Raspberry Pi, Bigtree Tech (BTT) GTR. Heavily inspired…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 124
- Makes
- 0
- Views
- 890
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
DIN rail mounts for combinations of the Duet 2, Duex2, Duex5, Raspberry Pi, Bigtree Tech (BTT) GTR. Heavily inspired by Voron Design, but intended to use heated inserts instead of self-threading screws.
Designed to accept McMaster-Carr P/N (94180A331)[https://www.mcmaster.com/94180a331] in the mounting plates.
Controller board mounting plates have three sets of mounting points but will be perfectly acceptable with two. Middle point provided for the OCD.
RaspPi mount uses push-fit pins to avoid having to order M2.5 hardware. All indication so far is that this works without issue.
RaspPi and GTR parts printed and tested in PETG. Duet parts untested, but based on dimensional drawings provided by Duet3D.
A 250mm/~10" DIN rail will easily accommodate either a Duet 2 + Duex5 or a GTR+Pi combination.
Fusion 360 project available for modification as desired: https://a360.co/3hh9SAX
Updates:
- 2021-12-28 - Add plate for Octopus / Octopus Pro
- 2021-02-16 - It appears I forgot to upload the Pi mount originally. Corrected.
Print Settings
Printer:
Railcore II 300ZL
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Notes:
Designed to be printed without supports.
Category: 3D Printer Parts