1 / 4
Kytarová podnožka (Guitar footrest) — image 1
1 / 4

Kytarová podnožka (Guitar footrest)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jedná se o podnožku na kytaru. Je kompletně tištěná, kromě čtyř šroubů M3x30 a potřebných matiček.

Rating
0 / 5
Likes
7
Downloads
50
Makes
0
Views
213
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Noncommercial — Share Alike

Jedná se o podnožku na kytaru. Je kompletně tištěná, kromě čtyř šroubů M3x30 a potřebných matiček. Spojovací tyče mají vybrání a je do nich potřeba vlepit výstuhu. Tyče se tisknou na výšku, výstuhy naopak na ležato, tyče tak mají větší pevnost a jsou kulaté. Sklopné nohy doporučuji tisknout na více perimetrů (osobně jsem tiskl na 8) a také s vyšší tloušťkou spodní a vrchní skořepiny (osobně 2,5 mm), aby se neprohýbaly. Tištěno z PETG.

This is a guitar footrest. It is entirely 3D-printed, except for four M3x30 screws and the required nuts. The connecting rods have recesses where reinforcement pieces need to be glued in. The rods are printed vertically, while the reinforcements are printed horizontally—this gives the rods greater strength and a rounded shape. I recommend printing the folding legs with multiple perimeters (I personally used 8) and increased top and bottom shell thickness (I used 2.5 mm) to prevent bending. Printed in PETG.

Tags