1 / 2
Flexible Saltire (Scottish flag) - MMU not needed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A flexible Saltire (Scottish flag) in the traditional 5:3 aspect ratio.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 52
- Makes
- 0
- Views
- 352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
The maximum height is 4.5 mm. The top blue part is 0.6 mm high. If you use the stl, add a colour change before this starts.
I used a 0.15-mm layer height, enabled ironing, and printed using Jayo white PLA and Lonenessl Blue PLA. The print takes 25 hours on a Mk3S+.