1 / 1
Brodit Ainope Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach a Ainope smartphone mount to a Brodit ProClip
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This adapter enables you to attach the AINOPE Handyhalterung Auto Lüftung to a Brodit ProClip. Follow these steps for installation:
- Disassemble the AINOPE Mounting Base
Remove the two screws located on the hook side of the AINOPE mounting base. Then you can remove the ball joint part. - Modify the Vent Clip
Saw off the unnecessary sections of the vent clip, leaving only the round base and the ball joint. The round base should fit snugly into the 3D-printed adapter. For added stability, secure it with a few drops of superglue. - Attach to the ProClip
Use four 2.5 x 12 mm wood screws to fasten the printed adapter to the Brodit ProClip.