XL Nextruder Main Plate and Idler Lever for rigid filaments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom main plate for the XL and idler based off KentO's bogie idler, tailored for brittle/rigid filaments.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 324
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
I couldn't get my printer to make it through a 20 minute print when using stiff/brittle/rigid CF filaments, specifically Siraya Tech PPA-CF (technically PAHT-CF).
The filament would break in the extruder between the two idler bearings. Same issue prevailed with the bogie idler.
I figured the filament was breaking because of the bend being placed on it, so I moved the idlers down such that the centerline of the top idler would be (roughly) in line with the centerline of the extruder gear. It took some tuning to get it to work right and apply the right amount of preload, but these parts seem to have solved my issues.
You will still need parts 1 & 2 from the bogie idler, the rest of the assembly is identical. 0.2 layer height, 0.4 nozzle.
I've had success printing in the aforementioned PPA-CF and in PETG.
I hope this helps someone else as well, as I've been pulling my hair out trying to get this printer to behave with this material.
The winning combination for printing PPA-CF included an increase in extruder tension (about 2 turns) and a totally unrestricted filament path - completely decoupling the bowden tube from the stock path, even removing it from the rear of the printer. I also replaced the bowden tube as my stock one had a slight crease in it from the black aligning clip. And I found that the high flow obxidian nozzles didn't behave appropriately with the CF filament, swapping to a diamondback resolved a ton of issues.