Cannabis Leaf Ashtray New Mode

📝 Description:

Add some chill vibes to your smoke session with this original cannabis leaf ashtray 🌿.
Designed with a smooth center cone to hold joints or blunts upright and a wide leaf base to catch ashes cleanly.
Perfect for smokers who want something cool, functional, and easy to clean.

✅ Easy print — no supports needed
✅ Unique leaf shape for a bold look
✅ Great for personal use or as a gift

👉 Follow & like for more original designs like this one! 🔥

🖨 K1 Max Detailed Print Settings — Cannabis Leaf Ashtray

🧵 Filament:

Material: PLA (recommended for crisp detail and minimal warping)

Nozzle Diameter: 0.4 mm

Color: Matte or silk PLA (matte hides layer lines better)

⚙ Layer Settings:

Layer Height: 0.20 mm (great balance of quality and speed)
(For ultra-smooth surface: 0.16 mm)

Top/Bottom Layers: 4 top / 4 bottom

Perimeters (Walls): 3

Seam: Aligned to back or sharp corner of a leaf (to keep visible areas clean)

Adaptive Layers: ON (if available) — smooths out curves on the leaf tips.

🧱 Infill:

Infill Density: 15–20%

Infill Pattern: Gyroid or Grid (Gyroid gives better strength & even ashtray base)

Top Surface Pattern: Concentric (for that clean, smooth leaf center look)

🌡 Temperatures:

Nozzle Temp: 205 °C (PLA)

PETG: 230 °C

ABS: 240 °C

Bed Temp: 60 °C (PLA)

PETG: 70 °C

ABS: 100 °C

Chamber Temp: 0 °C (PLA), optional warm enclosure for ABS

💨 Cooling:

Fan: 100% after first 2 layers (PLA)

For PETG: start at 50–60% after 3rd layer.

For ABS: off or minimal to prevent warping.

🧲 Adhesion & Supports:

Adhesion Type: Skirt (2 loops, 5 mm distance)

Brim: Optional (5 mm) if you notice lifting on the leaf tips.

Supports: ❌ None needed (model is flat with upward cone).

🏃 Speed:

Print Speed: 100 mm/s (K1 Max default high-speed)

For best surface finish: reduce outer wall speed to 40–50 mm/s

Inner wall speed: 80 mm/s

Infill speed: 100 mm/s

Acceleration: 5000 mm/s²

Retraction Distance: 0.8 mm

Retraction Speed: 35 mm/s

Combing: Within Infill (prevents visible travel scars)

✨ Extra Quality Tips:

Enable “Ironing Top Layers” for a glassy smooth top.

Set Top Surface Flow to ~98% to prevent over-extrusion buildup.

Lower Outer Wall Flow to 98% as well for super crisp edges.

Enable “Z hop” on retraction (0.2 mm) to reduce nozzle drag across the leaf tips.

Use a 0.25 mm or 0.4 mm nozzle if you want maximum tip detail.

🧼 Post-Print:

Lightly sand with 400–600 grit sandpaper if you want a buttery smooth top.

Optional clear coat or matte sealer to protect from burn marks or resin stains.

✅ Why this works:

Thicker walls = more durability for ashtray use.

Lower outer wall speed = cleaner leaf detail.

High cooling = sharp tips & crisp cone.

Ironing = smooth top center surface.