Remix for A1 MINI and EZVIZ CB2 of the excellent model by grizzie17 I made several modifications to better fit the A1 MINI, and converted the mount for the Ezviz CB2 cam.
ASSEMBLY INSTRUCTIONS
Obviously Print all the necessary parts.
Assemble the 2 pieces of the bracket using a sliding joint (if you want you can add some glue to secure the 2 pieces of the bracket, but the joint is still tight enough that the 2 pieces will not move once inserted.
Assemble the bracket with the CAM holder.
Insert the original articulated support included with the Ezviz CB2 cam into the support you just printed, inserting it with a sliding movement similar to a “drawer”. Be careful when inserting the articulated support so as to orient the maximum excursion “notch” towards the outside (this will allow you to orient the cam more accurately).
“Optionally” you can insert the ring to lock the articulated support to the cam support.
Attach the bracket to the A1 Mini printer.
Now you can secure your Ezviz CB2 to the magnetic swivel mount, and adjust the position of the cam according to your needs.
If you have any suggestions or comments, please leave them in the comments.
