Parametric Laser Air Assist Nozzle for SainSmart Genmitsu Fixed Focus Laser - OpenSCAD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed in OpenSCAD for the laser linked below: https://www.sainsmart.com/collections/laser-…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 194
- Makes
- 0
- Views
- 897
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Designed in OpenSCAD for the laser linked below:
Air hose connector designed for the FoxAlien Air Assist Pump:
https://www.foxalien.com/collections/cnc-accessories/products/foxalien-air-assist-pump
Different outer / inner diameters can be changed in the OpenSCAD source file and the model (should) adjust well.
The print is very small so you can get this working for your rig with just a few tweaks. It should resize well as I used basic trigonmetry to help maintain a good shape.
Print Settings
Printer Brand: Creality Ender 3 v2
Rafts: No
Supports: Doesn't Matter
Resolution: 0.20
Infill: 15%
Filament: Dollar General Cost Cutter Extreme PETG Screaming Green
Notes:
I only had bed supports, but they may not be necessary. My latest print time was 11 minutes.
How I Designed This
At this point, December 1, 2021, I have not yet even fired up my laser engraver. I printed the @lewiswalsh print and it had a smaller diameter than I needed, so I hacked this together since the construction is fairly simple.
I have a few Christmas gifts planned for later this month and I will adjust variables and post new versions if I find a better way.
Making Changes to this Print
Some of you might be intimidated by OpenSCAD. If so, this is for you.
If you have to make a change to the model, I think that's the best way. The .scad file is just a text file and I (think) the variable names are clear enough so you can make your own changes. It is a parametric model and should adjust itself accordingly.
Basically, you do these steps:
Download OpenSCAD. It runs on many platforms.
Open the .scad file with OpenSCAD. You can also try the Visual Studio Code plugin -- that's what I normally use. You still need to install OpenSCAD to visualize your changes.
Make changes.
In OpenSCAD, hit the F6 key or Design -> Render. It wiil take a moment or two depending on your CPU, etc.
Save as STL, 3MF, whatever.
Slice and dice.
Do a cartwheel (required).
Changelog
June 17, 2022 -- Source .scad file was updated for easier use in Customizer. No values or procedures were changed.