Doll clothes hanger with grooves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a hanger for small sized clothes like doll's clothes with two grooves, a middle opening with a lock.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
Doll clothes hanger with groove and middle opening with lock mechanism 👕
Description:
This is a hanger for small sized clothes like doll's clothes like Labubu homemade clothes (my use case).
It has 2 wide grooves to fit the epaulettes on the clothing and a middle opening which can be easily accessed to insert another clothe (e.g. a pant, tie, scarf, towel or even money :) ) more easily with a lock mechanism.
Once printed, the lock mechanism often get stuck together because of the small size, so I do a small cut on between the upper and lower part to unstuck them, it frees the lock and become ready to open and close easily.
You can see on the pictures where I mass printed them on my Anycubic Kobra MAX and some hanging item example on the opening.
Some specs 📝:
- hanging circle diameter = 125mm
- hanging base to hanging head = 400mm
- groove size = 125mm
- middle opening height = 75mm
- middle opening width = 550mm
Here is the sketch :
Made in Autodesk Fusion.