Recycled Cardboard Molding - Acoustic Panel Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mold to turn old cardboard into DIY acoustic panels to dampen sound.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the “Recycled Cardboard Molding” project I found on Thingiverse. I wanted to try and make sound absorption panels using recycled materials.
- I took an existing (sine wave) press and removed the pattern and then created a brand new sound absorbing pattern. (to mimic what I've seen in other sound panel design)
- I added a raised hexagon pattern to the base plate. (to mimic what is found in the “BAUX Bio-Panel” design)
- I increased the height of the frame to give a roughly ~30mm thick panel piece. (thicker than the 20mm BAUX panel)
- Due to the increased thickness, I also added 1mm drain holes into each of the hexagons.
(final note: I haven't actually tested any of it)
Added a Press extender plate and an extended version of the actual press, just in case.
Added a new Hex base with larger drain holes.