Storehouse 20 Bin Gridfinity Bases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A standard size gridfinity system for the Storehouse bin sold at harbor freight, Gridfinity credit goes to Zack Freedman
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a set of grdfinity baseplates and a custom spacer that fits in a Storehouse 20 bin organizer sold at harbor freight.
The gridfinity grid is fully not owned by myself, and all credit for the grids goes to Zack Freedman. The only thing I edited was to add the spacers. But I am including a standard 5x5 base as well, in case you don't already have grid files in the sizes needed Gridfinity site (https://gridfinity.xyz/)
It will support bins up to about 6 standard grfinity height, 46.4mm. The bottom grids have a L to them to prevent them falling out if you tip the bin. The other grids do not. My thought on this was having something tall enough in the bottom 2x2's may not happen for everyone, but a full sized bin in the larger grids will keep them in place. And it saves filament.
Yes you loose some space by not doing custom sizes, but it allows you to use other creators gridfinity bin designs that rely on the standard sizing. Which, I would rather have than a few extra mm of space.
Standard gridfinity print settings :) So, really no changes.
Print List:
1x - 5x5 grid (Largest size my printer could print)
1x - Upper Right
1x - Bottom Left
1x - Bottom Right