Timing Belt Pulley GT2 80t 6mm sleeve for 20t pulley
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.08 – €1.33 net (excluding VAT)
For file: GT2 60T 6mm v5_0.2mm_ABS_MK3S_1h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.21 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.4 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
80teeth belt pulley for 6mm belts as sleeve on a GT2 20teeth
- Rating
- 0 / 5
- Likes
- 57
- Downloads
- 656
- Makes
- 0
- Views
- 3,802
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Inspired by https://www.reddit.com/r/voroncorexy/comments/ajyzxb/new_80t_gears_details_in_the_comment/
HINT: Voron moved away from printed Z gears. This is only a makeshift alternative
https://www.reddit.com/r/VORONDesign/comments/t7mi36/gt2_80t_pulley_6mm_belt_for_voron24_zdrive_diy/
Non Printed parts needed:
* 5 x M3x8mm flathead screw (https://de.aliexpress.com/item/4001338395909.html)
* GT2 20 tooth pulley 6-7mm width with removed cap (https://de.aliexpress.com/item/4001338395909.html) (You can remove the caps yourself very easily)
This 80teeth belt pulley for 6mm belts is a cheaper alternative to the relatively expensive full aluminum pulleys like https://de.aliexpress.com/item/32783298317.html
This pulley needs a beheaded aluminum/meta GT2 20 tooth pulley as a core element. It will be fixed with 5 M3x8mm flathead screws.
I use these for my voron 2.4 z drive idlers. (The pulley from reddit that served as inspiration pully from the reddit thread does not fit in the voron z drive.)
I will report on durability when they have some more duty hours on my printer :)
I would suggest to print these in ASA or ABS and 100% infill. I would not recomment using PETG or PLA. They will be under heavy duty and any flex will result in weird behaviour.