1 / 1
Vacuum adapter: Festool PS 300EQ jigsaw to Miele vacuum
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect the standard Festool suction socket for the PS 300EQ jigsaw to Miele household vaccums.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 62
- Makes
- 0
- Views
- 642
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapter to connect the standard Festool suction socket for the PS 300 EQ (OD 28 mm, part-no. 10027974) to Miele household vacuums (OD 35 mm). The fit is intentionally pretty tight and you might need to sand/file down the Z seam on the inside of the adapter for a perfect fit.
Print settings
Typically prints without supports. There is an inner chamfer, which stops the jigsaw part from sliding in too far. This section can be easier to print with supports enabled.
Recommended settings:
- Layer height 0.2 - 0.24 mm
- Line thickness 0.42 mm
- Outer wall flow 95%