Headset hanger for 20mm desk - Logitech G335
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to clamp on edge of desk around 20mm, there's some room for more or less with the screw
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 127
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
I designed this to fit the natural curve of my Logitech G335 headphones with the plan of hanging them from the hard part so the ski strap portion can rest, but it should be similar to the curve of may others.
Modeled in Onshape. I printed vertically so threads print and used organic supports with a support blocker across the curved part where the headphones rest. I also put a rubber foot on the top of the screw (I keep some extras from devices that come with them) and a piece of rubber under the top of the hook to keep it from sliding around or damaging the surface.
Onshape document here if you'd like to adjust it yourself:
https://cad.onshape.com/documents/32423cf6a7ca7d4e56b36859/w/4f2b8a8afb22fefb3ec89cfd/e/1fa1b51ae1ade765e92ea17f