Elecrow DIS05490T (5" touch screen) compatible mount for Sovol SV08 Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will mount the klipperscreen in place of the OEM screen. Cutouts align with the HDMI, USB and speaker ports.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 70
- Makes
- 0
- Views
- 414
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two piece bezel and mount that replicates the screen angle of the OEM and engages the mounting slots on the front of the printer frame. Requires eight 3mm heat inserts and 8 M3x6mm screws. Four inserts in the ends of the mounting bar and four to mount the screen to the bezel.
Note that I have seen a different model 5" screen by Elecrow shown in a Youtube review. The HDMI port on that screen is on the top and it will not fit this case. This is for model DIS05490T with all 3 ports on the right side.
Note also that the display will be upside down when you first fire up the printer. The fix is documented here:
https://forum.sovol3d.com/t/rotate-klipper-hdmi-display-180-sv08/6035/18
I'm including the FreeCad design files in case you need to tweak it or Elecrow changes the board again.