Gridfinity 2x4 Stand for Hakko/Zhaoxin 936 Soldering Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity 2x4 Stand for Hakko/Zhaoxin 936 Soldering Station
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 6
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
Gridfinity 2x4 Stand for Zhaoxin Soldering Station. I used Cover - 2x2 - atucom.stl as a base (can't find now the source, though, also 2x4 was somewhat broken so I readjusted two 2x2). On the photos you can see Zhaoxin Soldering Station 936DH. I believe it should also be compatible with some Hakko 936 stations as well ( not tested).
Stand dimensions are 151x72mm.
Magnets 6x2mm
Please like, create makes and add comments also to the original model, thanks!
Changelog
2025.10.26 - initial release
provided gcode is just for time and material estimations
0.2mm PETG 0.4 nozzle
no brim, no supports, no skirt
Assembly
print
add magnets 6x2mm
you can use hot air to bend the two thin walls on the side to clamp the stand in place, but I suggest using hot glue in the corners.