SpiceShelf Extender
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.54 – €3.10 net (excluding VAT)
For file: SpiceShelf_Extender_v3_slicer_0.4n_0.2mm_PETG_XLIS_2h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.82 excluding VAT (range midpoint).
- Weight reported by the author
- 52 g
- Print time reported by the author
- 2.18 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
helps to stack two spice jars above each other to gain some space
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 7
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this SpiceShelf Extender to get a bit more room in my spice rack.
It holds two small cylindrical jars and fits neatly into my store-bought spice shelf.
Dimension of a jar:
round about 41mm diameter, 77mm height
Motivation:
Our favorite spice brand recently switched to cardboard packaging with biodegradable plastic bags, which is great for the environment — but unfortunately, not very durable. The bags get brittle quite quickly and tend to break apart.
So I bought a box of small glass jars to use as replacements.
Before long, I was running out of space, so this seemed like a simple and practical fix.
Printing:
The model is split into two parts, which are aligned and connected with three small plastic dowels.
This way, both parts can be printed flat without supports, and the dowels keep them nicely aligned while gluing.
Print the dowels upright with a skirt
You don't need to print it as a strong part, two perimeters and 10% infill seems to be ok
I used PETG but PLA should work as well
I included STEP file so you can tweak around with the model
----
no affiliate link / just to give a reference for the jars I used:
https://amzn.eu/d/h6QnWax