1 / 2
Clamp for securing a PUG to a 3030 frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This clamp is used to attach a PUG to a 3030 profile based frame. Only 1 3030 t-nut and a 5x10 screw is needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
You may need to add supports for the base. The base needs m3 heatinserts and the clamp is then attached with 2 m3 screws
This is made for the cutout of the pug_v4_l_75mm.stl
This model was made in Onshape https://cad.onshape.com/documents/9aea2e24187df5ea0f921614/w/3655b02d51b93219287a1558/e/7fe3723d1c0b5e76c03e5b1b?renderMode=0&uiState=68fe133a2195008bbebdcbc7
Use with these PUG: https://www.printables.com/model/378567-pug-parametric-umbilical-gland