1 / 2
Spyro - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 96x170mm in size
Filaments Used:
PLA+ Sunlu Black
PLA+ Sunlu Purple
PLA BambuLab Basic Orange
PLA+ Sunlu Fuschia
PLA+ Sunlu White
PLA BambuLab Basic Sunflower Yellow
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Purple
At layer #14 (1.2mm) swap to Orange
At layer #17 (1.44mm) swap to Fuschia
At layer #19 (1.6mm) swap to Purple
At layer #23 (1.92mm) swap to White
At layer #25 (2.08mm) swap to Sunflower Yellow
At layer #27 (2.24mm) swap to White for the rest.