Lenovo TB-X606F wall HomeAssistant holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall holder for lenovo tb-x606f, used for HomeAssistant display
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
3D printed wall mount designed for my Home Assistant dashboard setup, which runs on an old Lenovo tablet (Lenovo TB-X304F) using the Fully Kiosk Browser app.
The mount allows you to easily place your tablet on the wall and use it as a smart home control center — displaying cameras, calendar, weather, and more.
Print Settings
Printer: Ender 3 V2 NEO
Material: PLA (White Creality)
Layer height: 0.2 mm
Infill: 20 %
Supports: required (Organic (tree) supports are the best)
💡 Notes
The design fits the Lenovo TB-X304F, but can be easily remixed for other tablets.
There is more space on the left side of the holder for the charging cable, which is hidden in the wall. (https://www.alza.cz/swissten-arcade-textilni-datovy-kabel-usb-microusb-1-2m-cerny-d6659467.htm)
Mounted using two or three screws .
🏠 My Setup
The tablet runs Home Assistant dashboard optimized for a 10″ screen in dark mode, connected to a local server.
This wall-mounted display acts as a central smart home hub — controlling cameras, heater, calendar, and radio.
GitHub documentation: https://github.com/fkrajsa/HomeAssistant_Smart_Home
______________________________________________________________________________________________________________________________
Čeština:
3D tištěný držák na zeď, navržený pro můj Home Assistant dashboard, který běží na starším tabletu Lenovo TB-X304F pomocí aplikace Fully Kiosk Browser.
Držák umožňuje pohodlně umístit tablet na zeď a používat ho jako centrální ovládací panel chytré domácnosti – zobrazuje kamery, kalendář, počasí, rádio a další informace.
Nastavení tisku
Tiskárna: Ender 3 V2 NEO
Materiál: PLA
Výška vrstvy: 0,2 mm
Výplň: 20 %
Podpory: Jsou vyžadovány (organické (stromové) jsou nejlepší)
💡 Poznámky
Model pasuje na Lenovo TB-X304F, ale lze ho snadno upravit i pro jiné tablety.
V levé straně držáku je větší prostor, kvůli nabíjecůmu kabelu, který je schován do zdi. (https://www.alza.cz/swissten-arcade-textilni-datovy-kabel-usb-microusb-1-2m-cerny-d6659467.htm)
Lze připevnit pomocí dvou nebo tří šroubů.
🏠 Moje sestava
Tablet běží jako Home Assistant dashboard optimalizovaný pro 10″ displej v tmavém režimu, připojený k místnímu serveru.
Tento nástěnný displej slouží jako centrální hub chytré domácnosti – ovládá kamery, topení, kalendář, rádio a další funkce.
FKStudio - 2025
https://fkstudio.cz/